![background image](http://html.mh-extra.com/html/icom/ic-910h/ic-910h_instruction-manual_611497014.webp)
12
2
PANEL DESCRIPTION
n
Rear panel
q
430(440) MHz ANTENNA CONNECTOR (p. 15)
Accepts a 50
Ω
antenna with a type-N connector.
w
DC POWER SOCKET [DC 13.8V] (p. 17)
Accepts 13.8 V DC through the supplied DC power
cable (OPC-657A).
Rear panel
view
+
_
e
144 MHz ANTENNA CONNECTOR (p. 15)
Accept a 50
Ω
antenna with a PL-259 connector.
r
SUB BAND EXTERNAL SPEAKER JACK
[SP (SUB)]
t
MAIN BAND EXTERNAL SPEAKER JACK
[SP (MAIN)] (p. 16)
Accepts a 4–8
Ω
speaker.
By connecting an external speaker for each or both
jacks, the audio for both the MAIN and SUB bands
is output as follows.
y
1200 MHz ANTENNA CONNECTOR (p. 15)
Available when the optional 1200 MHz band unit
is installed. Accepts a 50
Ω
antenna with a type-N
connector.
u
KEY JACK [KEY] (p. 15)
Accepts a paddle, a straight key or external elec-
tronic keyer with
1
⁄
8
inch standard plug.
(
+
)
(
_
)
(dot)
(com)
(dash)
i
SUB BAND DATA SOCKET [DATA (SUB)]
o
MAIN BAND DATA SOCKET [DATA (MAIN)]
(p. 13)
6-pin mini plug DIN jack to connect a TNC, etc. for
high speed data communications.
Independent data sockets enable simultaneous re-
ception in both MAIN and SUB bands for data com-
munication.
(MAIN band: TX/RX, SUB band: RX only)
!0
ACCESSORY SOCKET [ACC(1)]
Enables connection of external equipment such as
a TNC for data communications, etc.
• See the right table for socket information.
!1
CI-V REMOTE CONTROL JACK [REMOTE]
(p. 78)
Designed for use with a personal computer via the
optional CT-17 for remote control of transceiver
functions.
!2
GROUND TERMINAL [GND] (p 14)
Connect this terminal to a ground to prevent electri-
cal shocks and other problems.
o
!2
w
e
r
t
y
u
i
q
!0
!1
MAIN AF
SUB AF
No
Int. SP
Int. SP
SP (MAIN)
Ext. SP
Ext. SP
SP (SUB)
Int. SP
Ext. SP
Both
Ext. SP (MAIN)
Ext. SP (SUB)
Содержание IC-910H
Страница 1: ...INSTRUCTION MANUAL VHF UHF ALL MODE TRANSCEIVER i910H ...
Страница 86: ...84 MEMO ...
Страница 87: ...85 MEMO ...