Icom IC-910H Скачать руководство пользователя страница 7

Страница: 7 / 88

PANEL DESCRIPTION

AUTO GAIN CONTROL•AUTO NOTCH FILTER

SWITCH [AGC•ANF]

➥

Push to switch the time constant of the

automatic gain control to SLOW and
FAST for the MAIN band.* (p. 28)

• SLOW selection (“FAGC” disappears) during

SSB (USB or LSB) operation, FAST selec-

tion (“FAGC” appears) during CW, data op

eration and while tuning with fast tuning dial
rotation are recommended.

* The AGC time constant can be selected on

the MAIN band only. FAST selection is fixed
on the SUB band.

For 1 sec.

➥

Push for 1 sec. to switch the automatic

notch filter function ON and OFF when
the optional DSP unit, UT-106, is in-
stalled. (p. 31)

•

Reduces interference signals such as beat,
RTTY or CW signals and the notch frequency
automatically follows the interfering signal.

kHz/MHz•TUNING STEP SELECTION SWITCH

[kHz/MHz] (p. 22)

➥

Push to select tuning step for the tuning

dial or scanning from 1 kHz, 1 MHz step
and regular tuning step* in sequence

• “

” appears above the 1 kHz or 1 MHz digit

when 1 kHz or 1 MHz tuning step is select-
ed, respectively.

* The regular tuning step is selected for each

operating mode as follows.

For 1 sec.

➥

Push for 1 sec. to enter the regular tun-

ing step selection mode.

• The tuning step can be selected for each op

erating mode independently.

• SSB/CW mode: 1, 10, 50 and 100 Hz step;

FM mode: 0.1, 5, 6.25, 10, 12.5, 20, 25 and

100 kHz step can be selected by rotating the
tuning dial.

SPEECH•LOCK SWITCH [SPCH•LOCK]

➥

Announces the receiving signal strength

and/or selected readout frequency when
the optional UT-102 is installed. (pgs. 69,
71)

For 1 sec.

➥

Push for 1 sec. to switch the tuning dial

lock function ON and OFF to prevent ac-
cidental setting changes. (p. 25)

TUNING DIAL

Changes the displayed frequency, selects set mode

items, etc.

BRAKE ADJUSTMENT SCREW

Adjust the tension of the tuning dial.

• Rotate clockwise to increase the tension; counterclock

wise to decrease the tension.

Brake adjustment screw

MEMORY CHANNEL UP/DOWN SWITCHES

[

UP]/[DOWN

] (p. 40)

➥

Push [

UP] to change the memory

channel up; push [DOWN

] to change

the memory channel down.

• Memory channel changes continuously while

holding either switch.

• Memory channels can be selected both in

VFO and memory modes.

For 1 sec.

Содержание IC-910H

























































































Результаты поиска

Содержание IC-910H

Отзывы:

Icom IC-910H, Инструкция по эксплуатации, Страница: 7 / 88

Результаты поиска

Содержание IC-910H

Отзывы: