Icom IC-7600 Скачать руководство пользователя страница 42

Страница: 42 / 196

BASIC OPERATION

Auto tuning step function

When rotating the main dial rapidly, the tuning speed
automatically accelerates, as selected.

Push

[EXIT/SET] several times to close any multi-

function screens, if necessary.
Push

[SET] (F-6) to select the set mode menu

screen.

• Holding down

[EXIT/SET] for 1 second also selects the

set mode menu screen.

Push

[OTHERS] (F-5) to select the Others set

mode.
Push

[

] (F-1) or [

] (F-2) to select “MAIN DIAL

Auto TS.”
Rotate the main dial to select the desired tuning

speed, between HIGH, LOW and OFF.

• HIGH : Approximately 5 times faster when the

tuning step is set to 1 kHz or smaller
steps.

Approximately 2 times faster when the

tuning step is set to 5 kHz or larger steps.

• LOW : Approximately 2 times faster
• OFF : Auto tuning step is turned OFF.

Push

[EXIT/SET] to exit the set mode.

⁄

tuning step function

When operating in SSB data, CW, RTTY or PSK, the

⁄

tuning function is available. Dial speed is reduced

⁄

of the normal speed when the

⁄

tuning function

is ON, for finer tuning control.

➥

Push

[1/4] (MF7) to toggle the

⁄

tuning function

ON or OFF.

• “

” appears when the

⁄

tuning function is ON.

Main dial

F-1

F-2

F-6

EXIT/SET

SET

F-5

OTHERS

HIGH (default)

⁄

¼ tuning step OFF

¼ tuning step ON

Содержание IC-7600





































































































































































































Результаты поиска

Содержание IC-7600

Отзывы:

Icom IC-7600, Инструкция по эксплуатации, Страница: 42 / 196

Результаты поиска

Содержание IC-7600

Отзывы: