manualshive.com logo in svg

Icom IC-7600, Инструкция по эксплуатации, Страница: 15 / 196

Поделиться
Скачать
Icom IC-7600 Скачать руководство пользователя страница 15

@1

 

MODE SWITCHES

  Selects the desired mode. (p. 36)

  •  Announces the selected mode via the speech 

synthesizer. (p. 39)

 

[SSB]

 

➥

  Selects the USB and LSB modes alternately 

when pushed.

 

➥

  Selects 

the 

SSB data mode (USB-D, LSB-D) when 

held down for 1 second in 

the 

SSB mode.

    •  In the SSB data mode, push to return to the SSB 

mode.

  ➥

  Switches D1, D2 and D3 when held down for 1 

second in 

the 

SSB data mode.

 

[CW]

   Alternately selects the CW and CW-R 

(CW reverse) 

modes when pushed.

 

[RTTY/PSK]

 

➥

  Alternately selects the RTTY and PSK modes 

when pushed.

  ➥

  Switches the RTTY and RTTY-R (RTTY reverse) 

mode when held down for 1 second in the RTTY 
mode.

  ➥

  Switches the PSK and PSK-R (PSK reverse) 

mode when held down for 1 second in PSK mode.

 

[AM/FM]

 

➥

 Alternately selects the AM and FM modes.

 

➥

  Selects the AM or FM data mode (AM-D/FM-D) 

when held down for 1 second in the AM or FM 
mode, respectively.

    •  In the AM or FM data mode, push to return to the 

AM or FM mode, respectively.

  ➥

  Switches D1, D2 and D3 when held down for 1 

second in the AM or FM data mode.

@2

 

FILTER SWITCH [FILTER] (p. 84)

 

➥

 Push to select one of 3 IF filter settings.

 

➥

  Hold down for 1 second to display the filter set 

screen.

@3

 

EXIT/SET SWITCH [EXIT/SET]

 

➥

  Push to exit, or return to the previous screen 

display during spectrum scope, memory, scan or 
set mode screen display.

 

➥

  Hold down for 1 second to display the set mode 

menu screen.

@4

  VOICE MEMORY RECORD SWITCH [REC] (p. 99)

 Push to store the previous received signal for 

 

➥

the preset time period.

    •  The preset time period can be set in the voice set 

mode. (p. 105)

 Hold down for 1 second to start recording the 

 

➥

received signal until the recording is stopped.

    • Push this switch momentarily to stop recording.
    • The memory records the latest 30 seconds of audio.

@5

  

VOICE MEMORY PLAYBACK SWITCH [PLAY] 
(p. 98)

 

➥

  Push to playback the selected voice memory in 

the RX memory screen for the preset time period.

    •  When the RX memory screen is not displayed, the 

previously recorded audio is played back for the 
preset time period.

 

➥

  Hold down for 1 second to playback all of the 

selected voice memory in the RX memory 
screen.

    •  When the RX memory screen is not displayed, all of 

the previously recorded audio is played back.

@6

  

AUTOMATIC TUNING SWITCH [AUTO TUNE]
(p. 91)

   Turns the automatic tuning function ON or OFF in 

the CW and AM modes.

IMPORTANT!
When receiving a weak signal, or receiving a 
signal with interference, the automatic tuning 
function may tune the receiver to an undesired 
signal.

@7

 

MAIN DIAL

   Changes the displayed frequency, selects the set 

mode setting, etc.

@8

 

SPEECH/LOCK SWITCH [SPEECH/LOCK]

 

➥

  Push to audibly announce the S-meter display, 

the displayed frequency and the operating 
mode. (p. 39)

    •  The parameters to be announced can be selected in 

the Others set mode. (p. 139)

 

➥

  Hold down for 1 second to turn the dial lock 

function ON or OFF.

 (p. 90)

    •  The dial lock function electronically locks the main 

dial.

    •  The lock indicator lights while the dial lock function 

is activated.

 

 

NOTE: The [SPEECH/LOCK] switch operation 
to activate the voice synthesizer or the dial lock 
functions can be replaced in the Others set 
mode. (p. 139)

@9

 

RIT/

∂

TX CONTROL [RIT/

∂

TX] (pp. 81, 95)

   Shifts the receive and/or transmit frequency without 

changing the transmit and/or receive frequency 
shown on the main VFO while the RIT and/or 

∂

TX 

functions are/is ON.

  •  Rotate the control clockwise to increase the frequency, 

or rotate the control counterclockwise to decrease the 
frequency. The RIT or 

∂

TX functions must be ON.

  •  The shift frequency range is ±9.999 kHz in 1 Hz steps 

(or ±9.99 kHz in 10 Hz steps).

Shift low

Shift high

6

1

PANEL DESCRIPTION

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

Содержание IC-7600





































































































































































































Отзывы:

Нет отзывов