Icom IC-7600 Скачать руководство пользователя страница 144 | Manualshive

Страница: 144 / 196

Icom IC-7600 Скачать руководство пользователя страница 144

Display set mode (Continued)

■

APF−Width Popup (APF OFF

➔

ON)

ON

Selects the pop-up display for the APF filter width
from ON or OFF. (default: ON)

MN−Q Popup (MN OFF

➔

ON)

ON

Enables the pop-up display capability when the
notch filter width is changed from ON to OFF.
(default: ON)

Screen Saver Function

60min

Turns the screen saver function ON (15, 30 or 60
minutes) and OFF. (default: 60 min.)
The screen saver will activate when no operation is
performed for the selected time period to protect the
LCD from the “burn-in” effect.

Screen Saver Type

Bound

Selects the screen saver type from “Bound,”
“Rotation” and “Twist.” (default: Bound)
The screen saver pattern can be displayed for your
reference while holding down [PREVIEW] (F-5).

Opening Message

ON

Turns the opening message screen display
capability ON or OFF. (default: ON)

My Call

Sets the introductory text, up to 10-character long,
displayed in the opening screen.
Usually, you set your call sign for the opening
screen.
Capital letters, numerals, some symbols (– / . @)
and spaces can be used.

When a keyboard is connected to the [USB]
connector on the front panel, the call sign can also
be edited from the keyboard.

z

Push [EDIT] (F-5) to select the name edit

condition.

• The cursor under the 1st character blinks.

x

Push [ABC]

(MF6)

, [123]

(MF7)

or [Symbol]

(MF7)

to select the character group, then rotate the main
dial to select the character.

• Push [123]

(MF7)

or [Symbol]

(MF7)

to toggle numerals

and symbols.

• Push [

Ω

] (F-1)

or [

≈

] (F-2)

for cursor movement.

• Push [DEL] (F-3)

to delete the selected character.

• Push [SPACE] (F-4)

to input a space.

• Pushing the transceiver’s keypad, [0]–[9] and [.] can

also enter numerals.

c

Push [EXIT/SET] to set the name.

135

10

SET MODE

«
...
142
143
144
145
146
...
»

Содержание IC-7600





































































































































































































Отзывы:

Нет отзывов