Icom IC-7600 Скачать руководство пользователя страница 23

Страница: 23 / 196

RTTY TUNING INDICATOR

Shows the tuning condition in the RTTY mode.

MODE INDICATOR

Shows the selected mode.

FREQUENCY READOUTS

Shows the operating frequency.

• Gray characters are used for not-selected readout.

MEMORY CHANNEL READOUTS

➥

Shows the selected memory channel contents

in VFO mode.

➥

Shows the VFO contents in memory mode.

SELECT MEMORY CHANNEL INDICATOR (p. 117)

Displays the displayed memory channel is set as a

select memory channel.

The select memory channels are used in the select

scan operation. The desired memory channels can
be assigned to 3 select groups, for fast, convenient
scanning.

MULTI-FUNCTION SCREEN

Shows the screens for the multi-function digital

meter, spectrum scope, voice recorder, memory
list, scan, memory keyer, RTTY decoder, PSK
decoder, IF filter selection, or set modes.

VFO/MEMORY CHANNEL INDICATOR (p. 28)

Displays the VFO mode or selected memory

channel number.

LCD FUNCTION SWITCH GUIDE

Displays the function of the LCD function switches

([F-1] to [F-6]).

MULTI-FUNCTION SWITCH GUIDE

Displays the function of the multi-function switches.

TX INDICATOR

➥

“

”

appears while transmitting.

(p. 40)

➥

Displays the frequency readout for transmit.

• “

” appears during an operating frequency

is not in an amateur band. When the band edge
warning beep is set to “OFF” (p. 34), “

” does

not appear.

• Appears on the sub band readout when the split

function is turned ON.

RIT INDICATOR

“

” appears when RIT function is in use.

∂

TX INDICATOR

“

” appears when

∂

TX function is in use.

RIT/

∂

TX SHIFT FREQUENCY INDICATOR

Shows the shift frequency for the RIT or

∂

function.

NOTCH INDICATOR (p. 91)

➥

“

” appears when the manual notch function

is in use. This function is available in

the

SSB,

CW, RTTY, PSK and AM modes.

➥

“

” appears when the auto notch function is

in use. This function is available in

the

SSB, AM

and FM modes.

APF/TPF INDICATOR

➥

“

” appears when the audio peak filter

function is in use. This function is available in
the CW mode. (p. 43)

➥

“

” appears when the twin peak filter

function is in use. This function is available in
the RTTY mode. (p. 51)

DUAL WATCH INDICATOR

“

” appears when the dualwatch function

is in use.

PANEL DESCRIPTION

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

Содержание IC-7600





































































































































































































Результаты поиска

Содержание IC-7600

Отзывы:

Icom IC-7600, Инструкция по эксплуатации, Страница: 23 / 196

Результаты поиска

Содержание IC-7600

Отзывы: