Icom IC-7600, Инструкция по эксплуатации, Страница: 38 / 196

29
3
BASIC OPERATION
BAND REGISTER 1 REGISTER 2 REGISTER 3
1.8 MHz 1.900000 MHz CW 1.910000 MHz CW 1.915000 MHz CW
3.5 MHz 3.550000 MHz LSB 3.560000 MHz LSB 3.580000 MHz LSB
7 MHz 7.050000 MHz LSB 7.060000 MHz LSB 7.020000 MHz CW
10 MHz 10.120000 MHz CW 10.130000 MHz CW 10.140000 MHz CW
14 MHz 14.100000 MHz USB 14.200000 MHz USB 14.050000 MHz CW
18 MHz 18.100000 MHz USB 18.130000 MHz USB 18.150000 MHz USB
21 MHz 21.200000 MHz USB 21.300000 MHz USB 21.050000 MHz CW
24 MHz 24.950000 MHz USB 24.980000 MHz USB 24.900000 MHz CW
28 MHz 28.500000 MHz USB 29.500000 MHz USB 28.100000 MHz CW
50 MHz 50.100000 MHz USB 50.200000 MHz USB 51.000000 MHz FM
General
15.000000 MHz USB 15.100000 MHz USB 15.200000 MHz USB
■
Selecting an operating band
The triple band stacking register provides 3 memories
for each band key, for storing frequency and mode
information.
This function is convenient when you operate 3
operating modes on one band. For example, one
register is used for a CW frequency, another for
a SSB frequency and the other one for a RTTY
frequency.
If a band key is pushed once, the frequency and
operating mode last used are called up. When the
key is pushed again, another stored frequency and
operating mode are called up.
See the table below for a list of the bands available
and the default settings for each band.
Band keys
D Using the band stacking registers
[Example]: 14 MHz band
Push
q
[14 5], then select a frequency and an
operating mode.
• The previously selected frequency and an operating
mode are memorized in the first band stacking register
of that band.
Push
w
[14 5] again, then select another frequency
and operating mode.
• The frequency and operating mode that is selected
in step
q
are memorized in the 14 MHz’s first band
stacking register.
Push
e
[14 5] again, then select another frequency
and operating mode.
• The frequency and operating mode that is selected in
step
w
are memorized in the 14 MHz’s second band
stacking register.
Push
r
[14 5] again
,
then select another frequency
and operating mode.
• The frequency and operating mode that is selected
in step
e
are memorized in the 14 MHz’s third band
stacking register.
• When [14 5] is pushed again, the first band stacking
register set in step
w
, is overwritten.
GENE F-INP
1.8 3.5
1 2
14
5
18
6
7
3
24
8
28
9
50
0
ENT
4
7
10
21