Icom IC-7600 Скачать руководство пользователя страница 150 | Manualshive

Страница: 150 / 196

Icom IC-7600 Скачать руководство пользователя страница 150

APF Type

SOFT

Select audio filter shape for APF between SOFT and
SHARP. (default: SOFT)

• SHARP : The Sharp filter shape rejects interfering

signals more aggressively.

• SOFT : The Soft filter shape makes

distinguishing noise and signals easier.
The audio filter width is related to the
CW pitch setting.

External Keypad (VOICE)

OFF

Sets the external keypad for voice message
transmission capability ON or OFF. (default: OFF)
See page 18 for the equivalent circuit of an external
keypad and connection.

• OFF : The external keypad does not function.
• ON : In the phone mode, pushing one of external

keypad switches transmits the desired voice
message contents.

External Keypad (KEYER)

OFF

Sets the external keypad for keyer memory
transmission capability ON or OFF. (default: OFF)
See page 18 for the equivalent circuit of an external
keypad and connection.

• OFF : The external keypad does not function.
• ON : In the CW mode, pushing one of external

keypad switches transmits the desired keyer
memory contents.

External Keypad (RTTY)

OFF

Sets the external keypad for RTTY memory
transmission capability ON or OFF. (default: OFF)

NOTE: Only RTTY memory channels RT1, RT2,
RT3 and RT4 can be transmitted using with the
external keypad.

See page 18 for the equivalent circuit of an external
keypad and connection details.

• OFF : The external keypad does not function.
• ON : In the RTTY mode, and while the RTTY

decode screen is active, pushing one of
the external keypad switches transmits the
desired RTTY memory contents.

External Keypad (PSK)

OFF

Sets the external keypad for PSK memory
transmission capability ON or OFF. (default: OFF)

NOTE: Only PSK memory channels PT1, PT2,
PT3 and PT4 can be transmitted using with the
external keypad.

See page 18 for the equivalent circuit of an external
keypad and connection details.

• OFF : The external keypad does not function.
• ON : In the PSK mode, and while the PSK

decode screen is active, pushing one of
the external keypad switches transmits the
desired PSK memory contents.

Keyboard [F1]–[F4] (VOICE)

OFF

Sets the voice message transmission capability
ON or OFF when one of the [F1] to [F4] keys of
the keyboard that is connected to the [USB] (A)
connector on the front panel is pushed.
(default: OFF)

• OFF : [F1] to [F4] keys do not function.
• ON : Pushing one of the [F1] to [F4] keys

transmits the desired voice message
contents during a phone mode operation.

141

10

SET MODE

Others set mode (Continued)

■

«
...
148
149
150
151
152
...
»

Содержание IC-7600





































































































































































































Отзывы:

Нет отзывов