Icom IC-7600 Скачать руководство пользователя страница 100 | Manualshive

Страница: 100 / 196

Icom IC-7600 Скачать руководство пользователя страница 100

91

4

RECEIVE AND TRANSMIT

■

Notch function

This transceiver has auto and manual notch functions.
The auto notch function uses DSP to automatically
attenuate beat tones, tuning signals, etc., even if they
are moving. The manual notch can be set to attenuate
a frequency via the

[NOTCH] control.

The auto notch can be used in the SSB, AM and FM
mode.
The manual notch can be used in the SSB, CW,
RTTY, PSK and AM modes.

➥

Push

[NOTCH] to toggle the notch function

between auto, manual and OFF in the SSB and
AM modes.

• Either auto or manual notch function can be

deactivated in the Others set mode. (p. 140)

➥

Push

[NOTCH] to turn the manual notch function

ON or OFF in the CW, RTTY, PSK modes.

➥

Push

[NOTCH] to turn the auto notch function ON

or OFF in

the

FM mode.

• The indicator on this switch lights green when the auto

or manual notch function is ON.

• When the manual notch function is ON, hold down

[NOTCH] for 1 second to select the notch filter width for
manual notch from wide, middle and narrow.

• Set to attenuate a frequency for manual notch via the

[NOTCH] control.

• “

” appears when auto notch is in use.

• “

” appears when manual notch is in use.

While tuning the manual notch, noise may be

heard. This comes from the DSP unit and does not
indicate an equipment malfunction.

■

Auto tune function

<MODE> CW/AM
The automatic tuning function tunes the displayed
frequency automatically when an off-frequency signal
is received within the range ±500 Hz (CW) or ±5 kHz
(AM).
This function is active while in CW or AM is selected.

➥

Push

[AUTO TUNE] to toggle the auto tune

function ON or OFF.

• “

” blinks when auto tune function is

activated.

• After 2 seconds has passed, the auto tune function

stops tuning automatically even it’s still off-frequency.

• If

[AUTO TUNE] is pushed when the RIT function is

ON, the auto tune function changes the RIT frequency,
not the displayed frequency.

IMPORTANT!
When receiving a weak signal, or receiving a signal
with interference, the automatic tuning function
may tune the receiver to an undesired signal.

NOTE: The automatic tuning function does not
active on the sub band.

[NOTCH] control

NOTCH

• Auto notch indication

Appears

• Manual notch indication

Appears

Unwanted tone frequency

Desired
signal (AF)

Desired
signal (AF)

Particular frequency is attenuated

Auto notch OFF

Auto notch ON

AUTO

TUNE

Appears

«
...
98
99
100
101
102
...
»

Содержание IC-7600





































































































































































































Отзывы:

Нет отзывов