Adjustment and control system
34
ACCESS PATH
:
→
ALARMS
No.
Parameter Description
Reading level
Writing level
Visibility Conditions
12.01 Cumulative alarm signal system
USER
-
Always
12.02
Expansion board communication alarm
CANBUS communication alarm among PLC modules.
This alarm generates:
- alarm signalling on the panel
- siren triggering
- burner enabling opening
- pump stop
- valve closing
This effect remains until key (R - Reset) is pressed
even if the alarm conditions disappear.
USER
-
Always
12.03 Minimum level 1 alarm
USER
-
Always
12.04 Minimum level 2 alarm
USER
-
Always
12.05 Maximum level alarm
USER
-
Always
12.06 Safety pressure gauge alarm
USER
-
Always
12.07 Burner shut-off
USER
-
Always
12.08 Wrong supply
USER
-
Always
12.09 Burner fan alarm
USER
-
Always
12.10 Pump 1 alarm
USER
-
Always
12.11 Pump 2 alarm
USER
-
If the second pump is enabled
12.12 Deaerator / water treatment alarm
USER
-
Always
12.13 Emergency button activated
USER
-
Always
12.14 Pressure sensor alarm
USER
-
Always
12.15 Ambient temperature probe alarm
USER
-
If the sensor is enabled
12.16 Burner modulation feedback signal alarm
USER
-
If the feedback is enabled
12.17 Level sensor alarm
USER
-
If the level sensor is enabled
12.18
TDS
sensor alarm
USER
-
If the
TDS
sensor is enabled
12.19
TDS
limit alarm
USER
-
If the
TDS
sensor is enabled
12.20 Flue gas temperature sensor alarm
USER
-
If the sensor is enabled
12.21 Flue gas high temperature: alarm
USER
-
If the sensor is enabled
12.22 Flue gas high temperature: burner stop
USER
-
If the sensor is enabled
12.23 Fan inverter failure alarm
USER
-
If the device ModBus management is
enabled
12.24 Fan inverter high temperature alarm
USER
-
If the device ModBus management is
enabled
12.25 Fan inverter wrong supply alarm
USER
-
If the device ModBus management is
enabled
12.26 Fan inverter excessive current alarm
USER
-
If the device ModBus management is
enabled
12.27 Time without continuous supervision expired
USER
-
Always
12.28 EGR valve alarm
USER
-
If the valve is enabled
12.29 Oxygen sensor alarm
USER
-
If the oxygen sensor is enabled
12.30 Oxygen % limit alarm
USER
-
If the oxygen sensor is enabled
ACCESS PATH
:
→
DATA AND METERS
No.
Parameter Description
Reading level
Writing level
Visibility Conditions
14.01
Number of burner starts
It represents the progressive number of the flame presence
signal rising edges
USER
-
Always
14.02
Burner hours of operation
It represent the total time of flame presence
USER
-
Always
14.05 Burner power output estimation
USER
-
Always
14.06 Burner total energy output estimation
USER
-
Always
14.07 Combustion efficiency estimation
USER
-
Only if ambient and flue gas probes are
present
14.08 Number of openings of the drain valve
USER
-
Only if the valve is enabled
14.09 Opening hours of the drain valve
USER
-
Only if the valve is enabled
14.10 Number of openings of the
TDS
valve
USER
-
Only if the valve is enabled
Содержание ECOVAPOR Series
Страница 78: ...Appendixes for Technical Personnel 78...
Страница 79: ...Appendixes for Technical Personnel 79...
