Icarus 3D M2 SERIES, Руководство пользователя

Страница: 19 / 40

Installing the software
Windows 32bit/64/bit
The software Repetier Host 0.95 is included in the package you downloaded from our
website. Start Setup by double-clicking “setupRepetierHost_0_95.exe” in the directory
“SOFTWARE”.
Follow all steps of the installer until the software is installed.
You can find a shortcut to the software in Start Programs Repetier-Host
→ →
Note: Windows XP users must download and install DotnetFX 3.5 from the
Microsoft website.
Note: If you run into trouble, you can try to download and install an older
version of Repetier Host. Version 0.84 and higher are supported by the printer.
Apple Mac
The software Repetier Host 0.95 is included in the package you downloaded from our
website.
Mount the DMG package and install the Repetier-Host software.
Follow all steps of the installer until the software is installed.
Linux
The software Repetier Host 0.95 is included in the package you downloaded from our
website.
Mount the package and install the Repetier-Host software.
Follow all steps of the installer until the software is installed.
Manual – ICARUS 3D M2 – 2014 -
www.icarus3d.eu
19
Note : You can find a detailed guide on the installation of the software on our
website. Further support can be found on the website of the software
developer. http://www.repetier.com