Getting started
Unpacking and connecting the printer
1.
Carefully unpack the
printer
2.
Make sure you do not cut
any cables or belts while
unpacking
3.
Before you switch on the
device, check the voltage
selector !
4.
Depending on your
location you will have to
choose 220V or 110V.
5.
Place the printer on a flat
and stable surface.
6.
Make sure nothing can
interfere
with
the
movement of the printer
parts.
7.
Connect the device to an
available power plug.
8.
Power the the device on
with the switch on the
power connector.
9.
A small red light on the PCB should now be on.
10. Connect the printer to a computer with the micro USB cable.
Manual – ICARUS 3D M2 – 2014 -
15
