iCanTek iCanView 240, Руководство пользователя

Страница: 2 / 70

iCanView240/250 User’s Guide
Use only the AC power adapter which conforms to the specification in data sheet or optionally provided AC
power adapter with the iCanView240/250.
If you would like to use the iCanView240/250 for security, monitoring, please check the legal regulations within the
country.
Note
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generate, use and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures
z Reorient or relocate the receiving antenna.
z Increase the separation between the equipment and receiver.
z Connect the equipment into and outlet on a circuit different from that to which the receiver is
connected
z Consult the dealer or an experienced radio/TV technician for help.
Be careful not to cause any physical damage by dropping or throwing the iCanView240/250 network camera.
Especially keep the network camera out of reach from children.
Do not disassemble iCanView240/250 or After Service Follow-up is not possible.
iCanView240/250 series network cameras are designed for outdoor/indoor use. Don’t use iCanView240/250 in an
environment that exceeds the limited range.
Directions
Rev.1.0 (Dec.2006) 2