iCanTek iCanView 240, Руководство пользователя

Страница: 30 / 70

iCanView240/250 User’s Guide
The network types supported by the iCanView240/250 are LAN(fixed
IP), PPPoE, and DHCP(automatic IP allocation)
Static IP Setup
When the network environment is fixed IP, select ‘LAN’ in the network
type, and put the IP address, Subnet Mask, Gateway, DNS1 and
DNS2. Ask your network administrator or ISP for the information.
DNS2 is used when DNS1 does not work.
PPPoE Setup
When the network environment is PPPoE and IP address is assigned
automatically, select ‘PPPoE’ in the network type. Next, fill in the
‘User Name’ and ‘Password’ fields with the values assigned by the
ISP.
DHCP Setup
When the network environment is “automatic IP allocation by DHCP”,
select ‘DHCP’ in the network type. For cable modem connection,
select this mode.
Refer to
[IP-installer user’s guide]
for “Host name and domain for
Cable Modem
IP Assign Type
Clone MAC
Refer to
[IP-installer user’s guide]
for “Clone MAC”
Each port should have a number below 65,535.
RTSP
The RTSP port is used for transmitting real time audio/video data
from the network camera. Default is 554.
Port Change
HTTP
HTTP port is used for the connection to the admin page. Default is
80.
You can restrict the access to the administrator page from IP
addresses beyond certain IP address range.
Restrict
Administrator
Access
Check at this box to restrict administrative log on.
Base IP Address
Input IP address of the PC which is intended to be used for log on to
administrative mode.
IP Filtering
Mask
This is same as subnet mask. It is used to allow administrative log on
only to the PCs located in the same subnet as the base IP address. If
you want to allow only one PC to access in administrative mode, set
this value to 255.255.255.255.
E-Mail Setup
Notify for IP
Change
If you check this, the IP address will be sent via E-mail whenever the
IP address changes. It is sent to the E-mail address set by “
Recv E-
Mail Address”
.
Rev.1.0 (Dec.2006) 30