iCanTek iCanView 240, Руководство пользователя

Страница: 35 / 70

iCanView240/250 User’s Guide
Confirm
Password
Add User
Username
Enter the user ID you want to add. Up to 100 users are supported by
iCanView240/250.
Add User
Password
Enter the user password.
Add User
Attribute
You can set different system resource access capabilities for each of the
users.
z Attributes are Audio, Bi-directional Audio and Pan/Tilt control.
z For example, if you want a specified user to hear the audio from
the iCanView240/250, check Audio in the check box.
User List
You can list “user ids” and “ their attributes” here.
z format : user id[A, BA, P] :
„ A – Audio,
„ B – Bi-directional audio,
„ P – PTZ, attribute.
You can delete specific user by clicking the
DELETE
button.
YES
SAVE
If you want to restrict viewing access to the iCanView240/250, check at
the box left to
Yes
and click on
Save
. Users need to input ID and
password to connect to iCanView240/250 in viewing mode in a pop up
window as shown below..
Fig. 5-8. User Authentication in iCanView240/250
Authentication
for Viewing
If No, default
attribute
If you uncheck for the Authentication for Viewing, all users can access
the iCanView240/250 with the same attribute set here. Checked
attributes are enabled. Click “
Save
” to save the attribute.
Current Time It shows you the current time of iCanView240/250.
Time Setup
Synchronize
with an
Internet Time
Synchronize the time with the internet time server at the right. When the
time server is out of the reach from iCanView240/250, you can assign
time server by filling in
Specific Time Server
field.
Rev.1.0 (Dec.2006) 35