iCanTek iCanView 240, Руководство пользователя

Страница: 20 / 70

iCanView240/250 User’s Guide
Frame Rate
The number of frames to be transmitted per
second.
Video Rate
Bandwidth assigned for video transmitted
from iCanView240/250.
equal to the number.
Administrator name
& password
For safety, you are recommended to
change these values from factory default.
For new connection, you need to input
changed values for corresponding fields.
Do not disclose these values to others and
memorize these values.
Default value
User name : root
Password : dw2001
User
Admin &
Time
Setup
User
Admin &
Time
Setup
Current Time
Input correct time in this field.
Default value :
2001/1/1
5. Connect the input and output signals to iCanView240/250.
Function Signal description Number Connectors
Audio/Voice in
Connect microphone or output from audio
devices.
1
Mic/LINE-In
Line Out
Audio out for
speaker
Audio from remote site is available from this
connector in bi-directional audio mode.
Connect speaker with amplifier.
1
Connecting Alarm
Sensor
IR sensor, Motion Sensor, Smoke
Detector…
1
Alarm
/Aux
Connecting Alarm
annunciating
device
Siren, Flashing Light, … 1
Network connection
Connect iCanView240/250 to the network,
LAN, ADSL or Cable modem.
1
Network
Supply AC power Apply AC24V power to network camera 1
AC24V
6. Remote video connection to iCanView240/250
Run i-NVR on your PC. Before connecting to iCanView240/250 it is needed to configure the connection
information on the i-NVR. More detailed information of using “ i-NVR ” can be found in [ i-NVR User’s
Guide ].
Rev.1.0 (Dec.2006) 20