iCanView240/250 User’s Guide
from iCanTek’s home page.
Refer to
[6.4
.
How To Upgrade Your iCanView240/250 System]
.
Bootloader
Upgrade
Upgrade the bootloader installed in the network camera via the network.
Bootloader needed for the upgrade can be downloaded from iCanTek’s
home page.
Refer to
[6.4
.
How to upgrade iCanView240/250 firmware]
Not applicable for iCanView240/250
Add PTZ File
Re-initialize the network camera to factory default state.
By checking on a Radio button “Except Network Configuration”, you can
preserve the parameters for the network. Checking on “All”, will return all
the parameters to factory default state.
Once iCanView240/250 is re-initialized as factory default state, it
should be set-up again using IP-Installer.
Factory
Default Setting
Perform remote reset by clicking the “CONFIRM” button.
All previous connections will be disconnected upon reset.
iCanView240/250 does not resume the connections and the users
must re-connect to the server manually.
System Reset
Rev.1.0 (Dec.2006)
48
Содержание iCanView 240
