IBM Universal Tape Library, Руководство пользователя, Страница: 66 / 96

Table 20. Error codes (continued)
Error
code Description Recommended action
7C A camera failure has occurred. Retry the operation. If the problem recurs,
replace the library controller. See “Removing
the library controller” on page 44 for more
information. If the problem recurs, replace
the library chassis. See “Removing the
library chassis” on page 43 for more
information.
7D Library memory has failed. Retry the operation. If the problem recurs,
replace the library controller. See “Removing
the library controller” on page 44 for more
information.
7E A library temperature problem has
occurred.
Retry the operation. If the problem recurs,
replace the library controller. See “Removing
the library controller” on page 44 for more
information. If the problem recurs, replace
the library chassis. See “Removing the
library chassis” on page 43 for more
information.
7F The firmware is incompatible with
the library.
Update the firmware. See Table 13 on page
32 for more information about updating the
firmware.
80 The MAC address is not correct. Specify the correct MAC address of the host
system. See “Configuring the library” on
page 28 for more information.
81 A power supply problem has
occurred.
Retry the operation. If the problem recurs,
replace the power supply. See “Removing a
power supply” on page 45 for more
information.
82 A fan problem has occurred. Replace the power supply. See “Removing a
power supply” on page 45 for more
information. If the problem recurs, replace
the library chassis. See “Removing the
library chassis” on page 43 for more
information.
83 A SCSI failure has occurred. Retry the operation. If the problem recurs,
replace the library controller. See “Removing
the library controller” on page 44 for more
information. If the problem recurs, replace
the host bus adapter, using the instructions
that came with your system.
90 The library firmware update
operation has begun.
No action is required.
91 The tape drive firmware update
operation has begun.
No action is required.
92 The tape drive firmware update
operation has begun.
No action is required.
93 The library backup firmware update
operation has begun.
No action is required.
94 The library firmware update has
been completed successfully.
No action is required.
56
Universal Tape Library User’s Guide