IBM Universal Tape Library, Руководство пользователя, Страница: 38 / 96

Table 11. Operations page tasks (continued)
Action Description Access procedure
Control tape
drives
Use the Drives page to perform the following
tasks:
v Shutdown
v Power on
v Power off
v Reset
To perform an action on a tape drive, complete the
following steps:
1. From the Status page, click the Operations
tab. The Operations page is displayed.
2. From the Operations page, click the Drives
tab. The Drives page is displayed.
3. Type the tape drive number.
4. Select the action that you want to perform.
5. Click Apply to start the inventory.
Configuring the library
Use the Setup page to perform the following tasks:
v
Identify the library
v Control user access
v
Work with SCSI IDs and Fibre Channel configuration settings
v Work with network information
v
Identify events for e-mail notification
v
Specify the date and time
v Configure automatic library actions
Table 12. Setup page tasks
Task Description Procedure
Identify the
library
This information is used to describe a library
for support purposes. Use the Identification
page to specify the following information:
v
Library name: A unique name
v
Contract number: The library contract
number
v
Asset number: A user-defined number
v
Location: The location of the library
v
Description: A short description of the library
v
Company: The name of the company
v
Address: The address of the company
To specify library identification information,
complete the following steps:
1. From the Status page, click the Setup tab.
The Identification page is displayed.
2. Specify the identification information.
Note: Information that is marked with an asterisk
(*) is required.
3. Click Save .
28
Universal Tape Library User’s Guide