IBM Universal Tape Library, Руководство пользователя, Страница: 43 / 96

Table 13. Utilities page tasks (continued)
Task Description Procedure
Park for
shipping
Use this page to park the robot for shipment.
1. From the Status page, click the Utilities tab.
The Utilities page is displayed.
2. From the Utilities page, click the Library tab.
The Library page is displayed.
3. Take the library offline.
4. Select the cabinet (library) that you want to
work with.
5. Click Park .
6. Bring the library online.
Restart the
library
Use this page to restart the library.
1. From the Status page, click the Utilities tab.
The Utilities page is displayed.
2. From the Utilities page, click the Library tab.
The Library page is displayed.
3. Click Reboot .
Run system
tests
Use this page to test the movement of the
robot in all axes. The following types of tests
can be run:
v Self-tests
v
Calibration statistics
v Random load or unload
v
Random slot
v Random drive
You can specify the number of times a test will
run. If you do not specify a number, the tests
run continuously until you stop them.
1. From the Status page, click the Utilities tab.
The Utilities page is displayed.
2. From the Utilities page, click the System
Tests tab. The System Tests page is
displayed.
3. Take the library offline.
4. Select the test type.
5. Select the cabinet (library).
6. Specify the number of test runs.
7. Click Start Test .
Chapter 4. Using the Remote Management utility
33