IBM Universal Tape Library, Руководство пользователя, Страница: 27 / 96

Chapter 3. Using the menus
Use the menus on the display screen to display information, issue commands, and
test library functions. Use the four control buttons under the display screen to select
menu options and set values. The functions of the buttons change according to the
menu or screen that is displayed.
To display the main screen, press any of the four control buttons under the display
screen.
Table 5 lists the information that is displayed by the menus.
Table 5. Menu information
Menu Information displayed
Info
v
Overview
v Hardware
v
Event Logs
v Statistics
Ops v Library Operations
v
Find Tape
v Move Tape
v
Drive Operations
v Scan Inventory
Setup
v
Cabinet
v
Library
v
Security
v Network
v
Date and Time
Diags
v
System-level Test
v Subsystem Test
v
Component Tests
Info menu
Press the Info button to display the Info menu.
Overview information
To display the overview information, complete the following steps:
1. From the Info menu, press the Down ( ↓ ) button to select Overview (if it is not
already selected), and press the Enter button. The Firmware Info screen is
displayed.
2. Press the Next button to display the following network information:
v
IP address
v
Network mask
v Gateway
3. Press the Exit button to return to the Info menu.
Hardware information
To display hardware sensor information, complete the following steps:
1. From the Info menu, press the Down ( ↓ ) button to select Hardware , and press
the Enter button. The Hardware info menu is displayed.
© Copyright IBM Corp. 2007
17