IBM Universal Tape Library, Руководство пользователя, Страница: 54 / 96

Installing the library chassis
To install the chassis, complete the following steps:
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 7.
2. Make sure that the library is turned off and that the power cord is disconnected.
3. Attach the back mounting brackets to the library.
4. Place the library chassis in the rack.
5. Install the screws that secure the mounting rails to the library chassis.
6. Install the screws that secure the mounting clamps to the back of the library
chassis.
7. Install the tape drives. See “Installing a tape drive” on page 47 for more
information.
8. Install the power supplies. See “Installing a power supply” on page 46 for more
information.
9. Install the magazines. See “Installing a magazine” on page 47 for more
information.
Removing the library controller
To remove the library controller, complete the following steps:
Power supplies
Tape
drives
Left magazine
Back mounting bracket
Figure 18. Removing the chassis
44
Universal Tape Library User’s Guide