IBM ThinkPad 760E, Руководство пользователя

Страница: 87 / 331

Using the Enhanced Video/MPEG Functions
b) If Video capture/MPEG status is enabled, go to step 4 on
page 69.
If not, continue to the next step.
c) Click on Advanced; then click on the 1st IRQ list box and
assign an IRQ for the device. (The default IRQ is 11.)
3
Restart the computer to make the IRQ setting take effect.
4
Open the Multimedia folder in OS/2.
5
Click on the Video IN Recorder icon.
For more information on how to use video-in function in OS/2,
use
Help.
Note
When you use the video-in recorder in OS/2, you can use
only Ultimotion Real-Time Compression as the
compression type. Other compression types are not
supported even if they are listed on the screen.
The following shows considerations when using the video-in feature
or video capture in OS/2:
Only one capture window can be open at a time.
Video-IN Recorder is an OS/2 MMPM/2 application for video
capture and video overlay. Its video capture size (width and
length) is limited to up to 320
×
240 pixels (for a NTSC video
source) or 384
×
288 pixels (for a PAL video source).
Also, largesize capture, for example, 640
×
480 for NTSC or over
768
×
576 for PAL, might be not available with your computer. If
you try capturing large images, the captured image will not look
as expected, or the capture application will be suspended with
the following error message:
SWVR118: The recording initialization failed return code is
5 8 - system out of memory
If you have this error message, close Video-IN; then restart it.
Before trying again, set the capture size to a smaller one.
Chapter 3. Operating Your Computer
69