IBM SAN768B-2, Инструкция по установке, обслуживанию и эксплуатации

Страница: 45 / 186

Table 3. Installation tasks, time, and items required (continued)
Installation task Time estimate Items required
Installing the rack mount kit 30 minutes Torque wrench with #2
Phillips screwdriver tip
Flathead screwdriver
Mounting and securing the
SAN768B-2 in the rack 30 minutes Torque wrench with #2
Phillips screwdriver tip
Lift tool and load plate
Installing power cables and
powering on the SAN768B-2 20 minutes Power cables
Establishing serial
connection, logging on to the
SAN768B-2, and configuring
IP addresses. 20 minutes Serial cable (provided in the
accessory kit). Workstation
computer with a serial port
or terminal server port and a
terminal emulator
application (such as
HyperTerminal). Ethernet IP
addresses for the chassis and
for both control processor
blades (total of 3 IP
addreses).
Installing an Ethernet cable,
opening a Telnet session, and
configuring the SAN768B-2
domain ID, date and time,
and additional system
parameters. Verifying and
backing up the configuration. 20 minutes Ethernet cable for Telnet
access. Refer to the
Fabric OS
Administrator’s Guide .
Installing transceivers as
needed 30 minutes (longer if using
high density port blades) SFP+, mSFP, and QSFP
optical transceivers as
needed.
Attaching fiber optic cables,
cable wraps, and cable
guides 2-3 hours Fiber optic cables and cable
wraps.
Disassembling and packing
the lift tool 20 minutes No special tools required.
Note: Assembly instructions for the lift tool are in the shipping container.
Tools required
You will require the following items to install the SAN768B-2 in the cabinet:
v Torque wrench with #2 Phillips screwdriver tip
v
Flathead screwdriver
v Lift tool
Parts list
The following parts list refers to items illustrated in Figure 3 on page 17
Table 4. Items supplied with the 14U rack mount kit
Item Description Quantity
For all types of installations
Chapter 2. Installing and removing a SAN768B-2
15