IBM SAN768B-2, Инструкция по установке, обслуживанию и эксплуатации

Страница: 156 / 186

System size and weight
The weight of the SAN768B-2 can vary considerably depending on the
combination of blades installed. Use Table 20 and Table 21 to determine the weight
of the system with your combination of port and application blades.
Table 20. System sizes and weights
System size Size or weight
Width 43.74 cm (17.22 in.)
Height 62.23 cm (24.5 in./14U)
Depth (without door) 61.29 cm (24.09 in.)
Depth (with door) 73.20 cm (28.82 in.)
SAN768B-2: 384-port configuration with
eight FC16-48 port blades including two CP
blades, 2 core switch blades. three blowers,
four power supplies, and one cable
management comb 101.3 kg (223.3 lb)
Empty chassis:
v
No blades
v No CPs
v No CRs
v No power supplies
v No fan assemblies
37.3 kg (82.2 lb)
Table 21 lists the weights of the compatible blades and FRUs
Table 21. System FRU weights
FRU Weight
CP blade (CP8) 3.0 kg (6.6 lb)
CR blade (CR16-8) 3.7 kg (8.1 lb)
FC16-32 port blade 2.8 kg (6.2 lb) without media
FC16-48 port blade 3.3 kg (7.3 lb) without media
FC8-64 port blade 3.36 kg (7.4 lb) without media
FX8-24 extension blade 4.2 kg (9.2 lb) without media
Port card filler panel 1.5 kg (3.2 lb)
Power supply 2.45 kg (5.4 lb)
Blower assembly 5.73 kg (12.6 lb)
WWN bezel 0.3 kg (0.6 lb)
Cable management comb 0.45 kg (1.0 lb)
Chassis door 2.09 kg (4.6 lb.)
Facility requirements
The facility where the SAN768B-2 is in use must meet the following requirements
to provide for correct operation:
v Adequate supply circuit, line fusing, and wire size, as specified by the electrical
rating on the chassis nameplate
126
SAN768B-2 Installation, Service, and User Guide