IBM SAN768B-2, Инструкция по установке, обслуживанию и эксплуатации

Страница: 18 / 186

Delivery and subsequent transportation of the equipment
The customer should prepare his environment to accept the new product based on
the installation planning information provided, with assistance from an IBM
Installation Planning Representative (IPR) or IBM authorized service provider. In
anticipation of the equipment delivery, the final installation site should be prepared
in advance such that professional movers/riggers can transport the equipment to
the final installation site within the computer room. If for some reason, this is not
possible at the time of delivery, the customer will need to make arrangements to
have professional movers/riggers return to finish the transportation at a later date.
Only professional movers/riggers should transport the equipment. The IBM
authorized service provider will only perform minimal frame repositioning within
the computer room, as needed, to perform required service actions. The customer
is also responsible for using professional movers/riggers in the case of equipment
relocation or disposal.
> (> ) 500 lbs. 227 kg.
a69i0333
DANGER
Heavy equipment—personal injury or equipment damage might
result if mishandled. (D006)
Caution notices
A caution notice calls attention to a situation that is potentially hazardous to
people because of some existing condition. A caution notice can be accompanied
by different symbols, as in the examples below:
If the symbol
is...
It means....
A hazardous electrical condition with less severity than electrical danger.
A generally hazardous condition not represented by other safety
symbols.
svc00169
55 kg ( 121.2 lbs)
>55kg (121.2 lb)
A specification of product weight that requires safe lifting practices. The
weight range of the product is listed below the graphic, and the wording
of the caution varies, depending on the weight of the device.
P/N 18P5850-B
SJ000752
A potential hazard of pinching the hand or other body parts between
parts.
A hazardous condition due to moving parts nearby.
A hazardous condition due to the use of a laser in the product. Laser
symbols are always accompanied by the classification of the laser as
defined by the U. S. Department of Health and Human Services (for
example, Class I, Class II, and so forth).
xvi
SAN768B-2 Installation, Service, and User Guide