IBM RS/6000 7043 260, Руководство по обслуживанию

Страница: 37 / 322

Symptom Action
Other Symptoms or Problems
You have OK displayed. The service processor is ready. Go to "MAP
0020: Problem Determination Procedure" in the
IBM RS/6000 Diagnostic Information for Multiple
Bus Systems.
You have STBY displayed. The Service Processor is ready. The system
was shutdown by the operating system and is
still powered on. This condition can be
requested by a privileged system user with no
faults. See SP error log for possible operating
system fault indications.
The system POST indicators are displayed on
the system console, the system pauses and
then restarts. The term "POST indicators" refer
to the icons (graphic display) or device
mnemonics (ASCII terminal) that appear during
the power-on self-test (POST). Go to “Boot Problems/Concerns” on page 3-48.
The system stops and POST indicators are
displayed on the system console. The term
"POST indicators" refer to the icons (graphic
display) or device mnemonics (ASCII terminal)
that appear during the power-on self-test
(POST). Go to “MAP 1540: Minimum Configuration” on
page 2-31 to isolate the problem.
The system stops and the message "STARTING
SOFTWARE PLEASE WAIT..." is displayed on
ASCII terminal, the boot indicator ( ) is
displayed on a graphics terminal.
Go to “Checkpoints” on page 3-34.
Chapter 2. Maintenance Analysis Procedures
2-5