IBM RS/6000 7043 260, Руководство по обслуживанию

Страница: 35 / 322

Symptom Action
Service Actions
You have parts to exchange or a corrective
action to perform. 1. Go to the Removal and Replacement
Procedures.
2. Go to
"
MAP 410: Repair Checkout
"
in the
IBM RS/6000 Diagnostic Information for
Multiple Bus Systems.
You need to verify that a part exchange or
corrective action corrected the problem. Go to
"
MAP 410: Repair Checkout
"
in the IBM
RS/6000 Diagnostic Information for Multiple Bus
Systems.
You need to verify correct system operation. Go to
"
MAP 410: Repair Checkout
"
in the
IBM
RS/6000 Diagnostic Information for Multiple Bus
Systems.
System Stops With An 8-Digit Number Displayed
The system stops with an 8-digit error code
displayed in the operator panel display or on the
console. Record the error code. Go to Chapter 3, “Error
Code to FRU Index” on page 3-1.
System Stops With An 4-Digit Number Displayed
The system stops and a 4-digit number is
displayed in the operator panel display or on the
console. If the number displayed begins with the
character "E0xx" then go to “SP Checkpoints”
on page 3-34.
If the number displayed begins with the
characters "E1xx-EFFF", make note of any
location code that is displayed on the second
line of the operator panel. If the location code
indicates a card slot (eg. P2-I3), replace the
card in the indicated slot. If this does not correct
the problem, then go to “Firmware Checkpoints”
on page 3-37.
For all other numbers record SRN 101-xxx,
where xxx is the last three digits of the four-digit
number displayed in the operator panel, then go
to the Fast Path MAP in the
IBM RS/6000
Diagnostic Information for Multiple Bus Systems.
Note: If the operator panel displays 2 sets of
numbers, use the bottom set of numbers as the
error code.
System Stops With An 3-Digit Number Displayed
The system stops with an 3-digit number
displayed in the operator panel display or on the
console. Record SRN 101-xxx, where xxx is the last
three digits of the four-digit number displayed in
the operator panel, then go to the Fast Path
MAP in the
IBM RS/6000 Diagnostic Information
for Multiple Bus Systems.
Chapter 2. Maintenance Analysis Procedures
2-3