IBM RS/6000 7043 260, Руководство по обслуживанию

Страница: 257 / 322

Ÿ
Ring Indicator Power-On Menu
Ring Indicate Power-On is an alternate method of dialing in, without establishing
a Service Processor session. If the system is powered off, Ring Indicate
Power-On is enabled, the server is powered on at the predetermined number of
rings, If the server is already on, no action is taken. In either case, the telephone
call is not answered. The caller receives no feedback that the server
powered-on. The Ring Indicator Power-On Menu and defaults are shown
below:
à ð
Ring Indicator Power-On Menu
1. Ring Indicate Power-On :
Currently Disabled
2. Number of Rings :
Currently 6
98. Return to Previous Menu
á ñ
– Ring Indicate Power-On may be set to 'Enabled' or 'Disabled'.
– Number of Rings may be set to any number from 1 to 255.
Ÿ
Reboot/Restart Policy Setup Menu, see “Reboot/Restart Policy Setup Menu”
on page A-25.
Ÿ
Power-on System
Lets you power-on the system immediately. For other power-on methods see
“System Power-On Methods” on page A-28.
Ÿ
Power-off System
Allows the user to power-off the server following a surveillance failure.
Appendix A. Service Processor Information
A-13