IBM RS/6000 7043 260, Руководство по обслуживанию

Страница: 285 / 322

Ÿ
Update Operator Panel
The SP displays Operator Panel data on the ASCII terminal if a remote
connection is active.
Ÿ
Environmental Monitoring
Environmental Monitoring is now controlled by the Service Processor instead of
the base system, with expanded error recording and reporting.
Ÿ
System Firmware Surveillance (Heartbeat Monitoring)
The SP monitors and time the interval between system firmware heartbeats.
Ÿ
Responding to System Processor Commands
The SP responds to any command issued by the system processor.
Runtime Phase:
This phase includes the tasks that the SP performs during
steady-state execution of the operating system.
Ÿ
Environmental Monitoring
The SP monitors voltages, temperatures and fan speeds (on some servers).
Ÿ
Responding to System Processor Commands
The SP responds to any command issued by the system processor.
Ÿ
Run-Time Surveillance (Heartbeat Monitoring)
If the device driver is installed and surveillance enabled, the SP monitors the
system heartbeat. If the heartbeat times out, the SP places an outgoing call.
This is different from the Bringup Phase scenario where two reboot attempts are
made before placing an outgoing call.
Service Processor Procedures in Service Mode
When the system is in service mode, the following service processor parameters are
suspended.
Ÿ
Unattended Start Mode
Ÿ
Reboot/Restart Policy
Ÿ
Call-Out
Ÿ
Surveillance
When service mode is exited, the service processor parameters revert back to the
customer settings.
Appendix A. Service Processor Information
A-41