IBM POWER 730, Руководство пользователя

Страница: 23 / 58

support arm, as shown in Figure 13.
3. To attach the other side of the support arm to the backside of the slide rail, pull the pin out (1) , and
then slide the bracket (B) into the left slide rail (2) , as shown in Figure 14.
4. Slide the extension bracket (E) into the right slide rail (1) . Push the bracket into the slide rail until the
spring-loaded latch snaps into place, as shown in Figure 15 on page 12.
Figure 13. Securing the cable-management stop bracket to the support arm
Figure 14. Extending the pin, and installing the bracket into the slide rail
Installing the server into a rack
11