IBM Nways 2216, Руководство по установке и первоначальной настройке

Страница: 28 / 66

Terminal Settings and Function Keys
Terminal Settings
Baud Rate: 19200 bits per second
Parity: None
Stop bits: 1
Duplex:
Full Duplex
Flow Control: XON/XOFF and RTS/CTS (see note 1)
Screen Control:
ANSI Full screen
Screen Width: 80 Characters
Screen Height: 24 Lines
Line Wrap: ON
Screen Scroll: ON
Carriage Return Translation: CR (0Dx)
Backspace Translation:
Destructive
Notes:
1. Terminals and Terminal emulator programs which do not have flow control
options should be set to "Permanent Request to Send".
2. Terminal emulators that require a terminal type selection should be set to
VT-220.
Function Keys
Function 1 (F1): <Esc> O P Hex: 1B 4F 50
Function 2 (F2): <Esc> O Q Hex: 1B 4F 51
Function 3 (F3): <Esc> O R Hex: 1B 4F 52
Function 4 (F4): <Esc> O S Hex: 1B 4F 53
Function 6 (F6): <Esc> [ 0 0 6 q Hex: 1B 5B 30 30 36 71
Function 9 (F9): <Esc> [ 0 0 9 q Hex: 1B 5B 30 30 39 71
Note:
¹
In the definitions of function keys 1 through 4, the character
following the <ESC> is the
capital
letter O.
¹
In the definition of keys 6
and 9 the characters following the <ESC> and the [
are number 0 (zero).
¹
In all six definitions, the characters are case sensitive.
3-4
2216 Installation and Initial Configuration Guide