IBM Nways 2216, Руководство по установке и первоначальной настройке

Страница: 44 / 66

Removing and Deleting an Adapter
Question How do I remove and delete an adapter from the configuration?
Answer
1
Access the command line interface (
*
prompt).
2
Type talk 6 and press Enter twice to reach the Config> prompt.
3
Enter list device.
4
Write down the interface number of the adapter that you wish to
delete.
Note: If you are removing a multi-port adapter, then you need to
record the interface number of all interfaces configured for that
adapter.
5
Enter delete interface interface number.
6
At the Are you sure? prompt, enter y.
7
Enter write to save your changes.
8
Reboot the IBM 2216 to make the configuration changes active.
For details of this procedure, refer to the Multiprotocol Access Services
Software User’s Guide.
Running Diagnostics
Question How are diagnostics run on a particular adapter?
Answer Refer to the IBM 2216 Maintenance Guide.
Up-to-Date IBM 2216 Information
Question How can I find out the most current information about the IBM 2216?
Answer Point your web browser to
http://www.networking.ibm.com/216/216prod.html
B-8
2216 Installation and Initial Configuration Guide