IBM Netfinity ServeRAID-4H Ultra160, Справочник пользователя

Страница: 104 / 192

Note: Ignore the warnings regarding the removal of IBM ServeRAID Logical
Disks.
8. Follow the on-screen prompts by clicking OK or Yes.
9. After the uninstallation of MSCS is complete, restart the server when
prompted.
10. After the server has restarted, click Start; then, click Settings
→
Control
Panel.
11. Double-click Add/Remove Programs.
12. Select IBM ServeRAID Windows NT Cluster Solution from the list of
installed components; then, click Add/Remove.
13. Repeat step 1 on page 89 through step 12 on page 90 for the other server in
the cluster.
Updating ServeRAID software in an MSCS cluster environment
Note: If you are upgrading your ServeRAID software after downloading it from the
IBM Support Web site, perform this procedure. If you are installing your
software using the IBM ServeRAID Support CD, refer to “Chapter 2.
Installing and configuring ServeRAID controllers” on page 13 for instructions.
Important
This upgrade procedure allows the cluster to remain online at all times. To upgrade the
cluster, perform the following steps on one server at a time. When all steps are completed
for Server A and both servers are reported in the Microsoft Cluster Administrator program as
up and all resources are online, repeat the steps for Server B.
Note: Use these instructions on a cluster running Microsoft Cluster Service (MSCS)
Release 1.00 and IBM ServeRAID Cluster Solution.
Step 1: Upgrading the IBM ServeRAID Manager program
To upgrade the ServeRAID Manager program, run the SETUP.EXE program on the
IBM ServeRAID Support CD.
Step 2: Upgrading the IBM ServeRAID Microsoft Windows NT Cluster
Solution
To upgrade the IBM ServeRAID Microsoft Windows NT Cluster Solution, do the
following on each server in the cluster:
1. Start the Microsoft Cluster Administrator program on the server you want to
upgrade and move all resources and groups to the other server (its cluster
partner).
2. Insert the IBM ServeRAID Support CD into the CD-ROM drive; then, type the
following command and press Enter.
d :\programs\winnt\cluster\setup.exe
where d is the CD-ROM drive.
3. Follow the instructions that appear on the screen.
90
IBM
®
Netfinity
®
User’s Reference: ServeRAID
™
-4H Ultra160 SCSI Controller