IBM Netfinity ServeRAID-4H Ultra160, Справочник пользователя

Страница: 34 / 192

11. Connect the other end of the SCSI cable to the Active PCI backplane or to a
SCSI device in the server. (See your server documentation or the system label
inside the server cover for the location of the SCSI connector on the
backplane.)
Note: When the ServeRAID controller and a SCSI CD-ROM drive are
connected to the same SCSI bus (cable), you must enable the
ServeRAID startable (boot) CD feature before the controller can start
from a CD. See “Setting the Bootable CD-ROM feature” on page 109 for
more information.
12. If you have physical drives to install, install them now. See your server
documentation for drive installation instructions.
Notes:
a. The ServeRAID controllers use SCSI ID 7.
b. (NetWare only) Removable-media devices (such as a CD-ROM drive)
connected to the same ServeRAID controller must each have unique SCSI
IDs, even when they are connected to different channels. For example, if
you have a CD-ROM drive on Channel 1 set to SCSI ID 6, you must not
have another CD-ROM drive on Channel 2 or Channel 3 of the same
ServeRAID controller set to SCSI ID 6.
13. Install the server cover.
14. If you disconnected the cables and power cords in step 2 on page 18,
reconnect the cables and cords. See your server documentation if you need
detailed instructions.
15. If you want to attach an external SCSI device to the ServeRAID controller,
continue with “Connecting external devices” on page 21. Otherwise, go to
“Step 2: Updating BIOS and firmware code” on page 21.
Figure 3. Connecting a ServeRAID-4H controller internal channel connector
20
IBM
®
Netfinity
®
User’s Reference: ServeRAID
™
-4H Ultra160 SCSI Controller