IBM Netfinity ServeRAID-4H Ultra160, Справочник пользователя

Страница: 101 / 192

d. Click Modify next to the Preferred Owner text box.
e. Select Server A and move it to the right side, into the Preferred Owners
panel.
f. Click OK. Server A appears in the Preferred Owner text box.
g. Make sure that the cluster group has failover enabled. For instructions on
how to do this, refer to the documentation that is included with the
Microsoft Cluster Services software.
h. Close the connection to the cluster and open it again to ensure that the
connection is through Server A.
11. Install the IBM ServeRAID Windows NT Cluster Solution program by doing the
following:
a. On Server A, run the utility SETUP.EXE program from the IBM ServeRAID
Windows NT Cluster Solution diskette or IBM ServeRAID Support CD and
follow the instructions that appear on the screen.
v
If you are using the diskette, type the following command from a
Windows NT command line:
a :\setup
where a is the diskette drive letter.
v
If you are using the CD, type the following command from a Windows
NT command line:
d :\programs\winnt\cluster\setup
where d is the CD-ROM drive letter.
b. When the program has completed, run the SETUP.EXE program on Server
B.
After the utility has been installed on both servers, all shared ServeRAID
groups and disk resources will be automatically created by the IBM
ServeRAID Cluster Solution setup program and then brought online. Server
A is the current owner of these groups.
12. Move the quorum resource from localquorum to a ServeRAID disk resource by
doing the following:
a. On Server A, run the Microsoft Cluster Administrator program and click the
cluster name to select the cluster you are using.
b. Verify that the same server (for example, Server A) owns the ServeRAID
disk resources and the localquorum resource and that the quorum resource
is moved to a RAID level-1 logical drive.
c. Using the right mouse button, click the cluster name to open the cluster.
d. Select Properties; then, select the Quorum tab.
e. In the Quorum Resource field, select a ServeRAID shared disk.
f. Click OK.
Refer to the Microsoft Cluster Solution Administrator’s Guide for more
information.
13. Install Service Pack 4 or later.
Note: If you installed Service Pack 4 or later previously, you must reinstall it
now.
You can now move the shared disk resources manually using the Microsoft Cluster
Administrator program or automatically during failover.
Chapter 8. Installing the Microsoft Cluster Service software on Windows NT 4.0
87