IBM Netfinity ServeRAID-4H Ultra160, Справочник пользователя

Страница: 49 / 192

Installing device drivers for NetWare
To install the ServeRAID device driver while installing NetWare 4.x or 5.x:
1. Use the instructions provided in the NetWare manual to begin the installation.
2. When the
Choose the Server Drivers - Disk Driver
prompt appears during
the install process, insert the IBM ServeRAID Device Drivers diskette.
3. Click Select additional or modify selected Disk/LAN drivers.
4. If IPSRAID appears, select Deselect a selected driver.
5. Click Select an additional driver; then, press the Ins (Insert) key to add an
unlisted new device driver.
6. Press F3 to specify a path; then,
v
For NetWare 4.x, type:
a :\netware4
where a is the diskette drive letter.
v
For NetWare 5.x, type:
a :\netware5
where a is the diskette drive letter.
7. Click IPSRAID.HAM from the list of device drivers that appears in the window;
then, press Enter.
Note: The IPSRAID.HAM and support files will be copied to the system volume.
8. Click OK to overwrite the existing files.
9. Follow the instructions in the NetWare manual to complete the installation.
Installing device drivers for Red Hat Linux 6.1(or later)
This section provides instructions for installing the ServeRAID device driver (version
1.0) from diskette. Before you can install the device drivers, you must create the
Red Hat device driver diskette (see “Creating the Red Hat Linux device driver
diskette” on page 35).
1. Insert the Red Hat 6.1 Installation CD into the CD-ROM drive.
2. Turn on or restart the server.
3. At the command prompt, type:
linux dd
and any other options for your installation; then, press Enter.
4. Follow the prompts to complete the installation.
Creating the Red Hat Linux device driver diskette: This section provides
instructions for creating the Red Hat device driver diskette on the following
operating systems: Windows 95, Windows 98, Windows NT 4.0, Windows 2000,
OS/2, and Linux.
Creating the diskette on Windows 95, Windows 98, Windows NT 4.0, or Windows
2000: To create the Red Hat Linux device driver diskette on Windows 95,
Windows 98, Windows NT 4.0, or Windows 2000, do the following:
1. Insert the IBM ServeRAID Support CD into the CD-ROM drive.
2. At a DOS prompt, type the following:
d :\tools\dsk4w32 images\redhatdd.img a :
Chapter 2. Installing and configuring ServeRAID controllers
35