IBM Netfinity 7100, Руководство пользователя

Страница: 98 / 200

84
IBM® Netfinity® 7100 User’s Reference
6. Touch the static-protective package containing the DIMM option to any
unpainted metal surface on the server. Then, remove the DIMM from the package.
Note:
To avoid breaking the retaining clips or damaging the DIMM connectors,
handle the clips gently.
7. To install the DIMMs, repeat the following steps for each DIMM that you install.
a. Turn the DIMM so that the pins align correctly with the DIMM connector.
b. Insert the DIMM by pressing the DIMM straight into the connector. Be sure
that the retaining clips snap into the closed position.
8. Install the memory board assembly:
a. Hold the memory board assembly and align it over the memory board
connector.
b. Insert the memory board assembly into the connector.
9. Install the processor housing cover and push the two pop rivets down to secure
the cover.
10. If you have other options to install or remove, do so now; otherwise, go to
“Completing the installation” on page 92.
Installing a microprocessor kit
Your server comes with one microprocessor installed on the processor board. If you
install an additional microprocessor kit, your server can operate as a symmetric
multiprocessing (SMP) server. With SMP, certain operating systems and application
programs can distribute the processing load among the microprocessors.
Notes:
1. Thoroughly review the documentation that comes with the microprocessor, so
that you can determine whether you need to update the server basic
input/output system (BIOS) code. The latest level of BIOS code for your server is
available through the World Wide Web. Refer to “Getting help, service, and
information” on page 152 for the appropriate World Wide Web addresses.
2. Obtain an SMP-capable operating system (optional). For a list of supported
operating systems, see http://www.ibm.com/pc/us/compat/ on the World
Wide Web.
Attention: To avoid damage and ensure proper server operation when you install
a new or an additional microprocessor, use microprocessors that have the same
cache size and type, and the same clock speed. Microprocessor internal and
external clock frequencies must be identical.
3. To order additional microprocessor options, contact your IBM reseller or IBM
marketing representative.
Microprocessor
speed (MHz)
Core/bus
fraction
J13 Jumper J14 Jumper J15 Jumper J16 Jumper
550 5.5 Pins 1 and 2 Pins 2 and 3 Pins 2 and 3 Pins 2 and 3
700 7.0 Pins 2 and 3 Pins 1 and 2 Pins 1 and 2 Pins 2 and 3
730 7.3 Pins 2 and 3 Pins 2 and 3 Pins 1 and 2 Pins 2 and 3
800 8.0 Pins 2 and 3 Pins 1 and 2 Pins 2 and 3 Pins 1 and 2
Table 5. Microprocessor core frequency selection