IBM LS21 - BladeCenter - 7971, Руководство по обслуживанию

Страница: 97 / 130

Installing a standard-form-factor expansion card
To install a standard-form-factor expansion card, complete the following steps.
Note: The following illustration shows how to install a standard-form-factor
expansion card in the blade server; installing a standard-form-factor expansion card
in the MPE unit is similar.
PR
ES
S H
ER
EW
HE
N
INS
TAL
LIN
G CA
RD
Standard-form-factor
expansion card
1. Touch the static-protective package that contains the expansion card to any
unpainted metal surface on the BladeCenter unit or any unpainted metal surface
on any other grounded rack component; then, remove the expansion card from
the package.
2. Orient the expansion card over the expansion card connectors.
3. Slide the narrow end of the card into the raised hook on the expansion card
bracket; then, gently pivot the wide end of the card into the expansion card
connectors.
Note: For device-driver and configuration information to complete the
installation of the expansion card, see the documentation that comes with the
expansion card.
4. Install the MPE unit, if one was removed while removing the expansion card
(see “Installing an expansion unit” on page 71).
5. Install the blade server cover (see “Installing the blade server cover” on page
69).
6. Install the blade server into the BladeCenter unit (see “Installing the blade
server in a BladeCenter unit” on page 66).
Chapter 4. Removing and replacing blade server components
81