IBM LS21 - BladeCenter - 7971, Руководство по обслуживанию

Страница: 61 / 130

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 3, “Parts listing, Types 7971 and 7972,” on page 59 to determine which components are CRUs
and which components are FRUs.
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
001-197-000
001-198-000
Test aborted.
1. Check the test log for messages indicating the
cause of the error, and take the indicated action.
2. Restart the server.
3. Run the diagnostic test again.
4. Run the Quick Memory Test All Banks diagnostic;
then, if an error is detected, take the indicated
action
5. Reinstall the blade server in the BladeCenter unit
and, if necessary, update the BIOS code on the
server; then, rerun the test (see “Firmware
updates” on page 97).
001-250-00n ECC Test logic Failed. See PC Doctor logs.
Note: n = Failing CPU. (1 – 4)
1. Restart the server.
2. Run the diagnostic test again.
3. (Trained service technician only) Replace the
failing microprocessor.
001-250-000 Failed processor board ECC.
1. Reseat the following components:
a. DIMMs
b. (Trained service technician only)
Microprocessor 1
c. (Trained service technician only)
Microprocessor 2
2. Replace the following components one at a time,
in the order shown, restarting the blade server
each time:
a. DIMMs
b. (Trained service technician only)
Microprocessor 1
c. (Trained service technician only)
Microprocessor 2
d. (Trained service technician only) System
board assembly
001-292-000 Core system: failed/CMOS checksum failed. Load the BIOS default settings by using the
Configuration/Setup Utility program and run the test
again (see the Installation and User’s Guide for your
blade server).
001-xxx-000 Failed core tests. (Trained service technician only) Replace the system
board assembly.
001-xxx-001 Failed core tests. (Trained service technician only) Replace the system
board assembly.
005-xxx-000 Failed video test. (Trained service technician only) Replace the system
board assembly.
030-xxx-000 Failed internal SAS interface test. (Trained service technician only) Replace the system
board assembly.
Chapter 2. Diagnostics
45