IBM InfoPrint 6700 Series, Руководство пользователя

Страница: 237 / 384

Overview
237
Rot. Char Size
(From page 188.)
•
Adjusted . Rotated (clockwise/counterclockwise), expanded characters
have a different size than an unrotated character with the same size
parameters.
•
Not Adjusted . Rotated, expanded characters will be the same size as
unrotated characters with the same size parameters.
The factory default is Adjusted.
Scalable Size
(From page 185.) This option determines whether scalable characters are
sized based on normal scaling or based on the size of block characters. If the
option Block is set, then the scalable character are made to be the same size
as block characters in the old IGP-X00 printers.
The options are Normal (the factory default) and Block.
SCS Buffer Cntrl
(From page 167.) This option functions like the Early Print Complete feature
(“Early Print Cmpl (Coax, TN3270)” on page 216) but is for SCS only.
•
Don’t Wait . The printer does not wait until the buffer is printed before
sending the print complete back to the host.
•
Wait Until Done . The printer waits until the buffer has printed before
sending the print complete back to the host.
NOTE: If set to Wait Until Done, printer speed may be reduced.
The factory default is Don’t Wait.
Select Char
(From page 185.) Instructs the IGP which decimal character (0-255) to ignore
from the host.
The range is 0-255, and the factory default is 0.
Select CPI
(From page 190, page 193, page 195, page 197, page 199.) This item selects
the characters per inch (CPI) value.
The options are 10.0, 12.0, 13.3, 15.0, 17.1, and 20.0 CPI.
The factory default is 10.0 CPI.
Emulation Submenus