![background image](http://html1.mh-extra.com/html/ibm/exp5060/exp5060_quick-start-manual_3858123014.webp)
Installing the cables
Use the information in this section to cable one or two storage expansion enclosures and a storage
subsystem, with or without drive-side trunking.
For more information about cabling configurations, see either the
IBM System Storage EXP5060 Installation,
User’s, and Maintenance Guide
that came with the storage expansion enclosure or the
IBM System Storage
DS5100 and DS5300 Installation, User’s, and Maintenance Guide
.
The EXP5060 is compatible with DS5100 and DS5300 storage subsystems. The following cabling
instructions are shown with the assumption that the EXP5060 will be connected to a DS5100 or DS5300
storage subsystem.
The following illustration shows the drive ports on each controller in the DS5100 and DS5300 storage
subsystems. If you have not already installed the DS5100 or DS5300 storage subsystem, you must do so
now. For more information about installing these storage subsystems, see the
IBM System Storage DS5100
and DS5300 Installation, User’s, and Maintenance Guide
.
Controller A drive ports
Controller B drive ports
14
Содержание EXP5060
Страница 22: ...22...