![background image](http://html1.mh-extra.com/html/ibm/exp5060/exp5060_quick-start-manual_3858123009.webp)
Installing and removing the handles
Install the handles on the storage expansion enclosure before you move the unit onto the lift tool. After
you install the storage expansion enclosure in the rack cabinet and remove the handles, store the handles
for future use.
Installing the handles
Complete the following steps to install the handles on the storage expansion enclosure:
1.
Locate the box of handles.
2.
To install a handle on the storage expansion enclosure, place notch at the bottom of the handle in the
opening in the storage expansion enclosure chassis, and push the handle in and up until the latch at
the top of the handle secures the handle to the chassis.
3.
Repeat step 2 for the three remaining handles.
Removing the handles
Before you install the storage expansion enclosure completely into a rack cabinet, you must remove the
handles. Complete the following steps to remove the handles from the storage expansion enclosure:
1.
To remove a handle to the storage expansion enclosure, release the latch with your thumb and pull
down and away from the unit.
2.
Repeat step 1 for the three remaining handles.
3.
Store the handles for future use.
Thumb
latch
Handle
9
Содержание EXP5060
Страница 22: ...22...