IBM eServer BladeCenter HS20 Type 8832, Руководство по техническому обслуживанию и устранению неисправностей

Страница: 43 / 158

Important: Do not place the label on the blade server or in any way block the
ventilation holes on the blade server.
Figure 13 shows the placement of the label, just to the side of the blade
server, on the BladeCenter T unit.
10. If you have other blades to install, do so now.
Note: Reinstall the bezel assembly on the BladeCenter T unit after you have
finished installing the blades (see the BladeCenter T Types 8720 and
8730
Installation and User's Guide for detailed information about
reinstalling the bezel assembly). However, if you installed an option
such as a PCI I/O Expansion Unit with PCI adapters that requires
cables, you will not be able to install the bezel assembly, which contains
an air filter for the BladeCenter T unit. If you cannot install the bezel
assembly, a filter must be provided on the rack. See the IBM
Eserver
BladeCenter T Planning and Installation Guide for information about
User label
Figure 12. Applying a label to the BladeCenter Type 8677
User
label
CMM
1
CMM
2
Figure 13. Applying a label to the BladeCenter Type 8720 or 8730
Chapter 5. Customer replacement units
33