IBM eServer BladeCenter HS20 Type 8832, Руководство по техническому обслуживанию и устранению неисправностей

Страница: 104 / 158

System
Note: Field replaceable units (FRUs) should be serviced only by qualified field
service technicians. Customer replaceable units can be replaced by the
customer.
Index
System, Type 8832 (models 11X, 21X, 31X, 9TX, C1X, C2X, G1X,
GTX, J1X, L1X, LEX, LTX, M1X, N1X)
FRU No. CRU/FRU
1 Microprocessor 533/2.4-512 with heat sink (model 9Tx) 90P3843 FRU
1 Microprocessor 533/2.67-512 with heat sink (model 11x) 73P9066 FRU
1 Microprocessor 533/2.80-512 with heat sink (model 21x, C1x, C2x, L1x,
LEx, LTx) 73P9067 FRU
1 Microprocessor 533/3.06-512 with heat sink (model 31x) 73P9068 FRU
1 Microprocessor 533/3.2-1 MB with heat sink (model G1x, GTx) 25K9520 FRU
1 Microprocessor 533/3.2-2 MB with heat sink (model J1x) 25K9583 FRU
1 Microprocessor 533/3.06-1 MB with heat sink (model N1x) 26K9370 FRU
2 Heat sink assembly (models 21x, 31x, 9Tx, C1x, C2x, G1x, GTx, J1x,
L1x, LEx) 49P2513 FRU
3 Memory module, 256 MB PC2100 ECC (models 21x, 31x, LTx) 09N4306 CRU
3 Memory module, 512 MB PC2100 ECC (models 9Tx, G1x, GTx, J1x) 09N4307 CRU
/3 Memory module, 512 MB PC2100 ECC (option) 09N4307 CRU
3 Memory module, 1 GB PC2100 ECC (models C1x, C2x, LEx, N1x) 09N4308 CRU
/3 Memory module, 1 GB PC2100 ECC (option) 09N4308 CRU
3 Memory module, 256 MB, non-Chipkill (models L1x, LTx, M1x) 73P2872 CRU
3 Memory module, 2 GB PC2100 ECC (option) 09N4309 CRU
4 Retention module (all models) 49P2633 FRU
5 Microprocessor heat sink filler (models 21x, 9Tx, GTx, L1x, LEx, LTx) 49P2609 CRU
6 System board (all models) 90P0114 FRU
7 Blade base (all models) 90P4713 FRU
8 Front bezel with customer card (models 9Tx, GTx, LTx) 25K9829 CRU
9 Front bezel with customer card (all models except 9Tx, GTx, LTx) 90P4766 CRU
10 Terminator card (all models) 59P6614 CRU
11 Cover and label (all models) 90P4796 CRU
System service label (all models) 25K8253 CRU
Warning label (all models) 90P4799 CRU
Hard disk drive, 40 GB 5400 RPM (models C1x, C2x) 33P3419 CRU
Hard disk drive, 40 GB 5400 RPM (model LEx) (primary) 71P7506 CRU
Hard disk drive, 40 GB 5400 RPM (model LEx) (alternative) 71P7502 CRU
IDE tray/interposer card (models C1x, C2x, LEx) 59P6630 CRU
Filler, hard disk drive (option) 19K1291 CRU
Blade expansion (option) 59P6632 CRU
Battery, 3.0 volt (all models) 33F8354 CRU
Fibre channel adapter tray (models C1x, C2x) 49P2514 CRU
Fibre channel adapter tray (option) 49P2514 CRU
Fibre channel expansion card (models C1x, C2x) 59P6624 CRU
Fibre channel expansion card (option) 59P6624 CRU
Miscellaneous parts kit (all models)
v Screw, M3.5x10 Phillips pan head, hard disk drive and adapter card
tray (4)
v Screw, M3.5 x 5 hex flange, system board (6)
v
Light pipe, hard disk drive LEDs (2)
v Screw, mobile hard disk drive tray, M3 x # slot cap (4)
v
Screw, 440, D connector (2)
v
Screw, M3.5 x 7 slotted Phillips hex flange head (8)
v Label, customer write-on (1)
02R9003 CRU
94
BladeCenter HS20 Type 8832: Hardware Maintenance Manual and Troubleshooting Guide