IBM BladeCenter HS20 Type 8843, Инструкция по установке и эксплуатации

Страница: 50 / 112

Closing the blade server cover
Important: The blade server cannot be inserted into the BladeCenter unit until the
cover is installed and closed or an expansion unit is installed. Do not attempt to
override this protection.
The following illustration shows how to close the blade server cover.
Cover
Pins
To close the blade server cover, complete the following steps:
1. Read the safety information beginning on page vii and “Installation guidelines”
on page 19.
2. If you removed the blade bezel assembly, replace it now (see “Installing the
blade server bezel assembly” on page 35 for instructions).
3. Lower the cover so that the slots at the rear slide down onto the pins at the rear
of the blade server, as shown in the illustration. Before closing the cover, check
that all components are installed and seated correctly and that you have not left
loose tools or parts inside the blade server.
4. Pivot the cover to the closed position, as shown in the illustration, until it clicks
into place.
36
Eserver
BladeCenter HS20 Type 8843: Installation and User’s Guide