IBM BladeCenter HS20 Type 8843, Инструкция по установке и эксплуатации

Страница: 23 / 112

BladeCenter HS20 specifications for non-NEBS/ETSI environments
The following table provides a summary of the features and specifications of the
BladeCenter HS20 Type 8843 blade server operating in a non-NEBS/ETSI
environment.
Note: Power, cooling, removable-media drives, external ports, and advanced
system management are provided by the BladeCenter unit.
Microprocessor:
Supports up to two microprocessors
v Intel Xeon dual 800 MHz processor;
2.8 GHz or faster
v
Intel chipset
Memory:
v
Dual channel 400 MHz (DDR2) with
4 dual inline memory module
(DIMM) slots (8 GB maximum)
v
Type: 2-way interleaved, DDR2,
PC3200, ECC SDRAM registered
x4 (Chipkill) DIMMs only
v
Supports 256 MB, 512 MB, 1 GB,
and 2 GB (4 DIMM slots)
Drives: Support for two internal
small-form-factor SCSI drives
Integrated functions:
v
Dual Gigabit Ethernet controllers
v Expansion card interface
v Baseboard management controller
(BMC) with IPMI firmware
v
ATI 7000M video controller
v
LSI 1020 SCSI controller
v
Light path diagnostics
v
Local service processor (BMC)
v
RS-485 interface for
communication with the
management module
v
Automatic server restart (ASR)
v Serial over LAN (SOL)
v Intelligent Platform Management
Interface (IPMI)
v
4 USB buses for communication
with keyboard, mouse, diskette
drive, and CD-ROM drive
Predictive Failure Analysis (PFA)
alerts:
v Microprocessor
v Memory
Electrical Input: 12 V dc
Environment:
v
Air temperature:
– Blade server on: 10° to 35° C
(50° to 95° F). Altitude: 0 to 914
m (2998.69 ft)
– Blade server on: 10° to 32° C
(50° to 95° F). Altitude: 914 m to
2134 m (2998.69 ft to 7000 ft)
– Blade server off: -40° to 60° C
(-40° to 140° F)
v Humidity:
– Blade server on: 8% to 80%
– Blade server off: 5% to 80%
Size:
v
Height: 24.5 cm (9.7 inches)
v
Depth: 44.6 cm (17.6 inches)
v
Width: 2.9 cm (1.14 inches)
v
Maximum weight: 5.4 kg (12 lb)
Note: The operating system in the blade server must provide USB support for the
blade server to recognize and use the keyboard, mouse, CD-ROM drive, and
diskette drive. The BladeCenter unit uses USB for internal communications
with these devices.
Chapter 1. Introduction
9