background image

Welcome. . .

Thank you for buying an
IBM server.

This server

contains

information for setting up,
configuring, and using
your server.

For detailed information about
your server, view the publications
on the

You can also find the most
current information about your
server on the IBM Web site at:
http://www.ibm.com/pc/support

Your server is based

on Enterprise X-Architecture,
and it features superior
performance, availability, and
scalability.

Documentation CD.

Installation

Guide

and User’s

Installation and
User’s Guide

Install and start

the blade servers

Install addtional

applications, such as

IBM systems management

software and IBM

ServeRAID programs

System is ready to use.

Go to the Server Support

flowchart to register

and profile your server.

Install options:
• Drives
• Microprocessors
• SCSI storage expansion
• Memory
• I/O expansion

If the BladeCenter

is not installed in a

rack, install it now

BladeCenter HS20

Type 8832

Using RDM

See www.pc.ibm.com/ww/eserver/

xseries/systems_management/index.html

for instructions

Using the NOS

installation instructions

at www.ibm.com/pc/support

Install an operating system

(choose one method)

Содержание BladeCanter HS20









































































































Отзывы: