IBM BladeCanter HS20, Инструкция по установке и эксплуатации

Страница: 52 / 104

Statement 21:
CAUTION:
Hazardous energy is present when the blade server is connected to the
power source. Always replace the blade cover before installing the blade
server.
9. Reinsert the blade server into the bay in the BladeCenter unit.
10. Turn on the blade server.
11. Start the blade server Configuration/Setup Utility program and set configuration
parameters as needed. See “Using the Configuration/Setup Utility program” on
page 45 for information.
Completing the installation
To complete the installation, perform the following tasks. Instructions for each task
are in the following sections.
1. Reinstall the blade server bezel assembly, if you removed it (see “Installing the
blade server bezel assembly” on page 39).
2. Close the blade server cover, unless you installed the SCSI storage expansion
unit option (see “Closing the blade server cover” on page 40).
Statement 21:
CAUTION:
Hazardous energy is present when the blade server is connected to the
power source. Always replace the blade cover before installing the blade
server.
3. Reinstall the blade server into the BladeCenter unit (see “Installing the blade
server in the BladeCenter unit” on page 41).
4. Turn on the blade server (see “Turning on the blade server” on page 13).
5. For certain options, run the blade server Configuration/Setup Utility program
(see “Updating your blade server configuration” on page 42).
Note: If you have just connected the power cords of your BladeCenter unit to
electrical outlets, you will have to wait until the power-on LED on the blade
server flashes slowly before pressing the power-control button on a blade
server.
38
BladeCenter HS20 Type 8832: Installation and User’s Guide