IBM BladeCanter HS20, Инструкция по установке и эксплуатации

Страница: 41 / 104

2. Shut down the operating system, turn off the blade server, and remove the
blade server from the BladeCenter unit. See “Removing the blade server from
the BladeCenter unit” on page 20 for instructions.
3. Carefully lay the blade server on a flat, non-conductive surface.
4. Open the blade server cover (see “Opening the blade server cover” on
page 21 for instructions).
5. Remove the bezel assembly (see “Removing the blade server bezel assembly”
on page 22 for instructions).
6. Locate the microprocessor socket on the system board.
7. Remove the heat-sink filler.
8. Install the microprocessor:
a. Remove the protective cover, tape, or label from the surface of the
microprocessor socket, if one is present.
b. Touch the static-protective package containing the new microprocessor to
any unpainted metal surface on the BladeCenter chassis or any unpainted
surface on any other grounded rack component; then, remove the
microprocessor from the package.
Chapter 3. Installing options
27